For information on 1st Article Test equipment, contact our First Article Inspector
Dan Cortte 920-686-5862
dcortte@kaysun.com
Kaysun Corporation, a worldwide leader in providing injection molding engineering solutions, offers a wide range of themal and mechanical plymer testing services. Our in-house material laboratory is capable of performing ASTM, ISO and custom tests to satisfy unique customer requirements.
| Equipment |
RANGE |
TYPE OF MEASUREMENT |
| CMM (DNC X 2) MITUTOYO BRIGHT 504 |
Scales resolution of 0.0001mm (.000004"). Measuring range of X = 505mm (20"), Y and Z =405mm (16"), the Crysta Plus 504 has a specified volumetric accuracy of (2.9+4L/l000) micro m perISO standards |
MANUAL/ AUTOMATIC |
| CMM (MANUAL) MITUTOYO B231 |
Scales resolution of 0.0001mm (.000004"). Measuring range of X = 505mm (29"), Y and Z =405mm (20"), the B231 has a specified volumetric accuracy of (2.9+4L/l000) micro m per ISOstandards |
MANUAL ONLY |
| VMM-AVANT OGP |
300 x 300 x 200 mm (12 x 12 x 8") |
MANUAL/ AUTOMATIC |
| MITUTOYO RA-116 ROUNDNESS CHECKER |
Dia=17.50'' Weight=44LBS |
MANUAL/ AUTOMATIC |
| SOUND RIG |
Sound Level Meter is “Sper Scientific Model840029” Kaysun Test Rig # 1524 Test Rig Drive Pulley RPM: 650 RPM |
MANUAL ONLY |
| SURFACE TESTER |
2 μin to 300 μin 4.0 μin |
SEMI AUTOMATIC |
| MIRCO Vu COMPARATOR |
Linearity Magnification0.00005 to 40 in10x, 20x,31.25x, 50x,62.5x, 100x, 200x(110 + 4.4L)μin0.000172 in |
MANUAL ONLY |
| SCALES |
0.01lb to 5000 lb |
MANUAL ONLY |
| MOISTURE ANALYZER |
40 °F to 100 °F20 %RH to 80 %RH1.0 °F2.0 %RH |
SEMI AUTOMATIC |
| FORCE GAGE |
0.01 lb to 10 lb
10 lb to 100 lb
100 lb to 1000 lb
1000 lb to 10000 lb |
SEMI AUTOMATIC |
| PULL TESTER |
0.01 lb to 10 lb
10 lb to 100 lb
100 lb to 1000 lb
1000 lb to 10000 lb |
SEMI AUTOMATIC |
| IMPACT/COMPRESSION TESTER |
0.01 lb to 10 lb
10 lb to 100 lb
100 lb to 1000 lb
1000 lb to 10000 lb |
SEMI AUTOMATIC |
| TORQUE TESTER AND WRENCHES |
5 ozf·in to 200 ozf·in
4 lbf·in to 150 lbf·in
7 lbf·ft to 250 lbf·ft
60 lbf·ft to 2000 lbf·ft |
MANUAL ONLY |
| HAND TOOLS (THREAD AND RING GAGES) |
1.0 in to 2 in ring
2/56 in to2 in thread |
MANUAL ONLY |
| PLUG AND PIN GAGES |
0.010 in to 8 in (209 + 1.1D) μin |
MANUAL ONLY |
| CALIPERS |
0 in to 40 in (575 + 12.8L )μin |
MANUAL ONLY |
| MICROMETERS -OD |
0 in to 12 in (56 + 0.2L ) μin |
MANUAL ONLY |
| MICROMETERS-ID |
1.5 in to 12 in (56 + 0.2L ) μin |
MANUAL ONLY |
| INDICATORS-DIAL/DIGITAL |
0.0 in to 2 in(21 + 17.4L ) μin |
MANUAL ONLY |
| INDICATORS-TEST |
0 in to 0.06 in (76 + 3.2L) μin |
MANUAL ONLY |
| HEIGHT GAGES |
0 in to 24 in (506 + 1.8L) μin |
MANUAL ONLY |
| GAGE BLOCKS |
.050 in TO 4.0 in |
MANUAL ONLY |
| PRESSURE TESTER |
0 to 30 psi |
SEMI AUTOMATIC |
| OHM METER |
0 to 999 ohms |
SEMI AUTOMATIC |
| SURFACE PLATES |
12in x 12in36in x 48in |
MANUAL ONLY |
TS accreditation through March, 2009
This scope is in recognition of a successful assessment to ISO/IEC 17025:1999 |
